M6E-X Crop Spraying Drone
USDA Crop Spraying Drone Testing
M6E-X Spraying Drone (2.6gal / 10L)
Agriculture Drone Sprayer
M6E-X Spraying Drone (2.6gal / 10L)
Load image into Gallery viewer, M6E-X Crop Spraying Drone
Load image into Gallery viewer, USDA Crop Spraying Drone Testing
Load image into Gallery viewer, M6E-X Spraying Drone (2.6gal / 10L)
Load image into Gallery viewer, Agriculture Drone Sprayer
Load image into Gallery viewer, M6E-X Spraying Drone (2.6gal / 10L)

M6E-X Spraying Drone (2.6gal / 10L)

Regular price
Sale price
Regular price
Sold out
Unit price

The M6E-X2 Crop Spraying Drone is the most efficient drone in its category! Operators love the included Obstacle Avoidance and the dual-pumps with 3 different nozzle options make spraying easy.

- +

Add Accessories
EVO II Gimbal Camera

EVO II Gimbal Camera



  • Under 55lbs

  • Great for Nurseries

  • FAA Approved

Click on the tabs below to learn more about the M6E-X2 Crop Spraying Drone


How Crop Sprayer Drones Work

You can operate this drone in three different ways; this give you ultimate flexibility and makes it easy to accomplish any spraying job. All modes offer automatic Terrain Following (if equipped), and either manual or fully automatic sprayer functionality.


Easy | Accurate | Repeatable 

  • Crop Sprayer Drone Ground Station App
  1. 1
  2. 2
  3. 3
  4. 4

When battery or liquid is low, the drone returns automatically and will resume exactly where it left off once replenished.

  1. Use the included Ground Station App to drop waypoints on the corners of your spray area (do this on the included Google Maps, or by flying the drone to the points)
  2. Mark any obstacles or areas to avoid
  3. Input your desired Swath and Altitude settings (see USDA Research for optimal performance)
  4. The software will design the best spray route; this can be rotated for wind or modified
  5. Power up the drone, click a few buttons on the app and the drone will conduct the mission!

Watch our quick explainer for oblong fields!


Fast | Flexible | Simple

Easy Crop Duster Drone

This is the fastest method for spraying and works best for square / rectangle shaped areas. As with Fully Automatic, when battery or liquid is low, the drone returns automatically and will resume exactly where it left off once replenished.

  1. Fly the drone to the corner of the field where you’d like to start your mission
  2. Toggle the A-B switch to the “A” position; the app will confirm that point A has been recorded
  3. Fly the drone to the opposite end of the field (the path between these two points will be the line that the drone repeats)
  4. Toggle the A-B switch to the “B” position; the app will confirm that point B has been recorded
  5. Push the RC stick to the left or the right; the drone will slide over to the direction you instructed and it will fly back towards the “A” side of the field and will repeat until you stop it.

The distance between rows (swath), speed and height are based on the parameter you set in the app. If needed, you can shorten or extend either end of the field during the mission


As you might suspect, this is the most basic form of operating the spraying drone. In this mode, you fly the drone with the Remote Controller (RC) and can use either an automatic (speed dependent) pump or manual pump mode. The terrain sensor allows you to fly on hillsides with ease. We recommend you use the GPS position hold feature so that the drone holds a hover and doesn’t drift in the wind.


Accurate | Precise | Effortless

This awesome feature allows you to focus on flying instead of fumbling with pump speed and extra calculations. Just select the desired flow rate / pump speed and the system does the work for you! The pump speed will adjust to account for flight speed and will turn off as appropriate to avoid over-spraying. When the system detects you are out of chemical, the pump will shut off and the drone will return to its home position automatically! And yes, it leaves a mark where it left off so it can automatically resume 🙂

An enhanced safety feature turns off the pump if there is an emergency 😉

M6E-X v2 Base Kit

  • UAV & everything you need to fly (GPS, Mission Planning App, Batteries & Charger)
  • Obstacle Avoidance Radars (front & rear)
  • Automatic Terrain Following
  • 4x Smart Batteries (1/flight)
  • 1x Smart Charging Station


  • U.S. Based Drone Experts

  • U.S. Based Technical Support

  • 24/7 Online Support Portal

SHIPPING (lower 48 only)

M6E-X v2 Productivity Kit

  • TRAINING (virtual or in-person, you choose)

  • 2 year DRONE PROTECTION PLAN (better than a standard warranty - covers accidents and failures)


M6E-X v2 Fly All Day Kit 

  • 4x Smart Batteries (1/flight)

  • 1x Smart Charging Station


    MODEL M6E-X (10L)

    Configuration – 6-rotor (VTOL)
    Flight Time (empty) – 25-30 min
    Flight Time (payload) – 10-12 min
    Safe Flying Speed – 22 mph (10 m/s)
    Wind Rating (stable) – 27 mph (12 m/s)
    Frame Wheelbase – 55 inches (1400 mm)
    Weight (without batteries) – 19.8 lbs (9 kg)
    Useable Payload (after batteries) – 2.64 gal (10 L)
    Standard Takeoff Weight (STOW) – 50.7 lbs (23 kg)
    Max Takeoff Weight (MTOW) – 52.9 lbs (24 kg)


    Typical Coverage Rates – 15–22 ac/hr (6–9 ha/hr)
    Typical Spray Height (above crops) – 9-12 ft (3-4 m)
    Typical Spray Swath (adjustable) – 13-16 ft (4-5 m)
    Typical Spraying Speed – 9-14 mph (4-6 m/s)
    Nozzle Quantity (adjustable) – 6 (although it sprays with 4 at a time, based on flight direction)
    Standard Spray Nozzle(s) (adjustable) Lechler – 110-015, 110-01, 110-02
    GPS Accuracy Horizontal – ±1.0m
    Vertical – ±0.5m
    Max Thrust Ratio – 2.25 (takeoff @ 23kg)


    Please note, price does not include shipping/freight, sales or other local taxes or duties. Please request a quote for specific pricing. *Your performance & flight times may vary based on conditions; features are subject to change without notice.